Very often, one needs to go and drill a wall, perhaps to affix a shelf, a piece of furniture or anything else and if you are not practical enough with drills and various instruments, the aesthetic “mess” is around the corner. Moreover, things get even more complicated when the wall to be drilled in question is of reinforced concrete.
This type of, in fact, in addition to being much sturdier than the others, is made up of iron parts, which make up the load-bearing structure of the wall, giving it the right solidity and sturdiness. If this type of wall is not drilled by following some precautions, as well as risking injury, you also risk breaking the tips or the mechanism of the drill itself, as well as aesthetically damaging your wall, so let’s see how to drill into concrete wall.
How to drill into concrete wall?
The iron structures that are inside the wall or the reinforced concrete pillar can break the drill bit or the drill itself; moreover, the resistance that you would encounter once you hit the iron could also cause you to discomfort to the shoulders and arms.
Use protective goggles
To avoid discomfort, pay close attention and always wear protective goggles. Then continue with the work, then draw a small mark on the wall with a pencil on the point you intend to drill after having taken the measurements well.
Use the proper drill
The drill you are going to use must be of good quality, so it must allow you a high number of turns without having to exert excessive pressure, taking advantage of the weight of your body. The hammers or high-quality corded drills will be perfect. As for the tips, in addition to those that you will have supplied with your drill, buy some tungsten separately. By doing so, you will see that you will not need to chisel.
Tips to drill into concrete wall
1. Before you start drilling into concrete, you’ll need to know how to do it safely. This will ensure you don’t damage the wall, or injure yourself. You can learn how to do this by watching online videos, or reading a book on the topic.
2. Get the right tools: When you’re starting to drill into the concrete, you’ll want to make sure you have the right equipment. You’ll need a drill with a variable speed, a hammer, and a drill bit.
3. Drill slowly: It’s important to drill slowly when you’re starting to drill into the concrete. You’ll want to make sure you’re not hitting the wall too hard. You can use the guide lines on the wall to help you get the correct angle, and drill at the correct speed.
4. Hammer gently: When you’re drilling into the wall, you’ll want to make sure you don’t hit it too hard. You can use a hammer to tap the wall gently to make sure it doesn’t crack.
5. Start in the centre: You can start drilling into the wall in the centre, or you can start in one corner. You can use the centre as a guide, and start in one corner, then work your way around the wall.
6. Finish up: Once you’ve finished drilling into the wall, you’ll want to finish it off. You can use a paint brush, or a chisel.
7. Clean up: You’ll need to clean up after you’ve finished drilling into the wall. You can use a vacuum cleaner, or a brush.
